Look up another CVE · open CVE-2026-98796 in the interactive tracker
CVE-2026-98796
net: ethernet: mtk_eth_soc: allocate dummy netdev sooner
Published 2026-10-18 (today) by the Linux kernel CNA. Subsystem drivers/net. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-98796 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | vulnerable | 6.1.190-1 | No fix published anywhere yet, neither in Debian nor upstream for the series bookworm tracks. Watch the Debian tracker page for this CVE. Advisories for bookworm have historically landed a median of 23 days after publication. |
| Debian 13trixie | fixed | 6.12.113-1 | Update the kernel and reboot. Fixed in 6.12.113-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.2.10-1 | Update the kernel and reboot. Fixed in 7.2.10-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.2.10-1 | Update the kernel and reboot. Fixed in 7.2.10-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
The RX rings and the shared NAPI are carried by an internal "dummy" netdev (eth->dummy_dev). mtk_probe() creates that dummy device, and adds the shared tx/rx NAPI to it, only after the MAC netdevs have been registered. That order has been there since the MT7623 support was added and leaves a window in which the netdevs are visible to the network core before the shared NAPI and the dummy device exist. If anything brings the first netdev up during that window (e.g. netifd opening the WAN link the instant the interface is registered), the first-open path runs without them. On NETSYS v2 and later SoCs mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev == NULL: WARNING: CPU: ... Missing net_device from driver in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs (MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open instead calls napi_enable() on a napi_struct that netif_napi_add() has not initialised yet and dereferences a NULL napi->dev. Allocate the dummy netdev and add the shared tx/rx NAPI to it before the register_netdev() loop. Both the dummy-allocation failure and a register_netdev() failure now unwind through mtk_unreg_dev(), which unregisters the net_device notifiers and the netdevs registered so far, stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the dummy carrier is freed. A netdev that opened during the window can also have queued the frame-engine reset worker (via the tx watchdog or phylink), so the probe error path now cancels eth->pending_work before freeing the shared state, as mtk_cleanup() already does on remove.
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
drivers/net/ethernet/mediatek/mtk_eth_soc.c
- What this is
- MEDIATEK ETHERNET DRIVERMAINTAINERS section matched on drivers/net/ethernet/mediatek/ · netdev@vger.kernel.org · Maintained
- Kernel module
- mtk_eth
Check it on the machine
grep -wE 'CONFIG_ETHERNET|CONFIG_NET_MEDIATEK_SOC|CONFIG_NET_VENDOR_MEDIATEK' /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w mtk_ethPrints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian does not build this code in 1 release. It does build it in 3 releases, so the answer depends on which release the machine runs.
- bookwormn
- trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- n
- not enabled on any flavour - this release does not build the code
- M
- a module where it is built at all; some flavours do not build it
- Build switches
- CONFIG_ETHERNET, CONFIG_NET_MEDIATEK_SOC, CONFIG_NET_VENDOR_MEDIATEK
- Reads as
- all on means the file is compiled; any one off means it is not.
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-10-18 (today)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- not scored
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- drivers/net
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 4.6 | 6.12.113 | 42001839e425 |
| 4.6 | 6.18.56 | 82be3d08de9e |
| 4.6 | 7.2.10 | 17eafd74de5a |
| 4.6 | 7.3 | 6f0c2c4f5e71 |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-98796, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.