CVE-2026-98767

What the bug is

When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") returns IRQ_NONE without writing back GEVNTCOUNT. Since the DWC3 interrupt is level-triggered, the uncleared IRQ source keeps the line asserted, causing a tight IRQ storm that accumulates 99,900 unhandled interrupts and triggers spurious.c:184 BUG -> kernel panic. The resulting call stack: __report_bad_irq+0xac/0xc8 note_interrupt+0x340/0x468 handle_irq_event+0xac/0xc0 handle_fasteoi_irq+0x120/0x228 gic_handle_irq+0x68/0x108 ... kernel BUG at kernel/irq/spurious.c:184 To reproduce, write a bogus value exceeding the event buffer length directly to the GEVNTCOUNT register: devmem <DWC3_BASE + 0xc40c> 4 0x1004 Write the bogus count back to GEVNTCOUNT to clear the IRQ source, consistent with the stale event clearing pattern in dwc3_event_buffers_setup(), and schedule error recovery to reinitialize the controller.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/usb/dwc3/core.h
drivers/usb/dwc3/ep0.c
drivers/usb/dwc3/gadget.c

What this is

DESIGNWARE USB3 DRD IP DRIVERMAINTAINERS section matched on drivers/usb/dwc3/ · linux-usb@vger.kernel.org · Maintained

Kernel module

dwc3

Check it on the machine

grep -wE 'CONFIG_OF|CONFIG_PCI|CONFIG_USB|CONFIG_USB_DWC3|CONFIG_USB_GADGET|CONFIG_USB_PHY|CONFIG_USB_SUPPORT' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w dwc3

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
• trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
• forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, s390x/s390x

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_OF, CONFIG_PCI, CONFIG_USB, CONFIG_USB_DWC3, CONFIG_USB_GADGET, CONFIG_USB_PHY, CONFIG_USB_SUPPORT

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-10-18 (today)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

not scored

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/usb

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
6.12.26	6.12.113	96918ca25ff4
6.15	6.18.56	ba927133b301
6.15	7.2.10	f51cadb02b43
6.15	7.3	1ff77cbefe5a
5.4.293	0	0
5.10.237	0	0
5.15.181	0	0
6.1.136	0	0
6.6.89	0	0
6.14.5	0	0