data built 2026-10-19T13:16:53Z

Look up another CVE · open CVE-2026-98766 in the interactive tracker

CVE-2026-98766

usb: gadget: aspeed-vhub: cancel wake work on device removal

Published 2026-10-18 (today) by the Linux kernel CNA. Subsystem drivers/usb. Debian urgency: not yet assigned.

What to do, per Debian release

Debian's own status for CVE-2026-98766 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source

ReleaseStatus VersionWhat this means
Debian 12bookwormvulnerable6.1.190-1No fix published anywhere yet, neither in Debian nor upstream for the series bookworm tracks. Watch the Debian tracker page for this CVE. Advisories for bookworm have historically landed a median of 23 days after publication.
Debian 13trixiefixed6.12.113-1Update the kernel and reboot. Fixed in 6.12.113-1. A running kernel keeps the old code until the machine restarts.
Debian 14forkyfixed7.2.10-1Update the kernel and reboot. Fixed in 7.2.10-1. A running kernel keeps the old code until the machine restarts.
Debian unstablesidfixed7.2.10-1Update the kernel and reboot. Fixed in 7.2.10-1. A running kernel keeps the old code until the machine restarts.

The vulnerability

What the bug is

wake_work is armed from the gadget .wakeup callback to resume suspended downstream ports, and it is never cancelled in ast_vhub_remove(), so a work item queued before or during removal can run after devm has freed vhub and its ports, a use-after-free. Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes no lock and the unbind path never clears wakeup_en, so a remote-wakeup request in flight on another CPU can re-arm the work after the cancel and before vhub is freed. ast_vhub_del_dev() already clears d->registered under vhub->lock before unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup() once d->registered is clear: the check and the schedule_work() are then atomic against the unbind, so a wakeup that passed before the flag was cleared is drained by the cancel_work_sync() after the del_dev loop, and one that arrives later returns without arming. Also move INIT_WORK() to the top of ast_vhub_probe(), since the probe error path reuses ast_vhub_remove() and would otherwise cancel a never-initialized work item. This issue was found by an in-house static analysis tool.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/usb/gadget/udc/aspeed-vhub/core.c
drivers/usb/gadget/udc/aspeed-vhub/dev.c
drivers/usb/gadget/udc/aspeed-vhub/hub.c
drivers/usb/gadget/udc/aspeed-vhub/vhub.h

What this is
USB SUBSYSTEMMAINTAINERS section matched on drivers/usb/ · linux-usb@vger.kernel.org · Supported
Kernel module
aspeed_vhub

Check it on the machine

grep -wE 'CONFIG_OF|CONFIG_PCI|CONFIG_USB|CONFIG_USB_ASPEED_VHUB|CONFIG_USB_GADGET|CONFIG_USB_PHY|CONFIG_USB_SUPPORT' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w aspeed_vhub

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

  • bookwormMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/arm64, arm64/cloud-arm64, arm64/rt/arm64, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
  • trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt/arm64, armel/rpi, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
  • forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt-arm64, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
M
a module where it is built at all; some flavours do not build it
Build switches
CONFIG_OF, CONFIG_PCI, CONFIG_USB, CONFIG_USB_ASPEED_VHUB, CONFIG_USB_GADGET, CONFIG_USB_PHY, CONFIG_USB_SUPPORT
Reads as
all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published
2026-10-18 (today)source
CVSS
no vector published, unrated
Attack vector
not published
EPSS
not scored
CISA KEV
not listedthe KEV catalogue
Debian urgency
not yet assignedsource
Subsystem
drivers/usb

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

IntroducedFixed inCommit
4.186.12.113f343bfa3fc9f
4.186.18.56474e9e1852fb
4.187.2.10c81504dfd2d9
4.187.320388c8d1d74

Why the CNA scored it this way

The kernel CNA published no CVSS vector and no reasoning for CVE-2026-98766, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.