CVE-2026-98763

What the bug is

In usb_enable_endpoint(), non-zero control endpoints (where usb_endpoint_xfer_control(&ep->desc) is true) populate both dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct usb_host_endpoint pointer. However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or dev->ep_in[epnum] depending on the direction bit of epaddr when reset_hardware is set, leaving the opposite direction's array slot pointing to the disabled/freed endpoint. Clear both dev->ep_out[epnum] and dev->ep_in[epnum] when disabling a non-ep0 control endpoint with reset_hardware set, and update the function kerneldoc accordingly. Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget to enumerate a USB device with a non-zero control endpoint (bEndpointAddress 0x01, bmAttributes USB_ENDPOINT_XFER_CONTROL), verifying that both dev->ep_in[1] and dev->ep_out[1] are cleared when the interface is disabled.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/usb/core/message.c

What this is

USB SUBSYSTEMMAINTAINERS section matched on drivers/usb/ · linux-usb@vger.kernel.org · Supported

Kernel module

usbcore

Check it on the machine

grep -wE 'CONFIG_OF|CONFIG_PCI|CONFIG_USB|CONFIG_USB_GADGET|CONFIG_USB_PHY|CONFIG_USB_SUPPORT' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w usbcore

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
• trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, s390x/s390x
• forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, s390x/s390x

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_OF, CONFIG_PCI, CONFIG_USB, CONFIG_USB_GADGET, CONFIG_USB_PHY, CONFIG_USB_SUPPORT

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-10-18 (today)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

not scored

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/usb

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
2.6.12	6.12.113	7a9f61476b0e
2.6.12	6.18.56	1da16c46b8d7
2.6.12	7.2.10	c50413ecb662
2.6.12	7.3	0e8baa78d872