CVE-2026-98562

What the bug is

wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/net/ethernet/wangxun/libwx/wx_hw.c
drivers/net/ethernet/wangxun/libwx/wx_lib.c
drivers/net/ethernet/wangxun/libwx/wx_ptp.c
drivers/net/ethernet/wangxun/libwx/wx_type.h

What this is

WANGXUN ETHERNET DRIVERMAINTAINERS section matched on drivers/net/ethernet/wangxun/ · netdev@vger.kernel.org · Maintained

Check it on the machine

grep -wE 'CONFIG_ETHERNET|CONFIG_LIBWX|CONFIG_NET_VENDOR_WANGXUN' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

Show whether Debian builds this, per release

Debian does not build this code in 3 releases. The build rule could not be established for 1 release, so nothing is claimed about those.

• bookworm?
• trixie, forky, sidn

?

not established - no Makefile entry for the affected file

n

not enabled on any flavour - this release does not build the code

Where a release above reads "not established", no build rule for the affected file was found in that release's kernel tree. That is a gap in this lookup, not a finding that the code is absent.

Build switches

CONFIG_ETHERNET, CONFIG_LIBWX, CONFIG_NET_VENDOR_WANGXUN

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-10-18 (today)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

not scored

CISA KEV

not listedthe KEV catalogue

Debian urgency

unimportantsource

Subsystem

drivers/net

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
6.15	7.2.9	e78b95cfd5df
6.15	7.3	3173cba11701