CVE-2026-98489

What the bug is

The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK>

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/net/ethernet/atheros/atl1c/atl1c_main.c

What this is

ATLX ETHERNET DRIVERSMAINTAINERS section matched on drivers/net/ethernet/atheros/ · netdev@vger.kernel.org · Maintained

Kernel module

atl1c

Check it on the machine

grep -wE 'CONFIG_ATL1C|CONFIG_ETHERNET|CONFIG_NET_VENDOR_ATHEROS' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w atl1c

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64
• trixieMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armel/rpi
• forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_ATL1C, CONFIG_ETHERNET, CONFIG_NET_VENDOR_ATHEROS

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-10-18 (today)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

not scored

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/net

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
2.6.29	5.10.271	e7acd4cdeccb
2.6.29	5.15.222	5ea2576a4f5e
2.6.29	6.1.189	4daf80da0c38
2.6.29	6.6.158	57b55367b6e3
2.6.29	6.12.112	9f2cc71a2e27
2.6.29	6.18.55	586847400b11
2.6.29	7.2.9	d4ab263e40fc
2.6.29	7.3	36c2009d90f2