Look up another CVE · open CVE-2026-98468 in the interactive tracker
CVE-2026-98468
KVM: arm64: Fix spurious warning for benign stage 2 teardown race
Published 2026-10-18 (today) by the Linux kernel CNA. Subsystem arch/arm64. Debian urgency: unimportant.
What to do, per Debian release
Debian's own status for CVE-2026-98468 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | not affected | 6.1.190-1 | Nothing to do. bookworm never shipped the vulnerable code. |
| Debian 13trixie | fixed | 6.12.113-1 | Update the kernel and reboot. Fixed in 6.12.113-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.2.9-1 | Update the kernel and reboot. Fixed in 7.2.9-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.2.9-1 | Update the kernel and reboot. Fixed in 7.2.9-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 Which was, in turn, triggered by an MMU notifier for the host invalidation: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() <- -EINVAL, triggering a WARN_ON() Racing with L0's teardown of stage 2 page tables: exit_mm() -> mmput() -> __mmput() -> exit_mmap() -> mmu_notifier_release() -> ... -> kvm_mmu_notifier_release() -> kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() -> [ acquire kvm->mmu_lock for write ] -> mmu->pgt = NULL [ among other tasks ] -> [ release kvm->mmu_lock for write ] It turns out there is a benign race resulting in a spurious warning: Thread A - notify: migration | Thread B - notify: release -------------------------------|--------------------------------- < kvm->mmu_lock held > | stage2_apply_range() | get mmu->pgt, check !NULL | ... | kvm_arch_flush_shadow_all() cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock > < drop kvm->mmu_lock > | < acquire kvm->mmu_lock> | ... | kvm_free_stage2_pgd() | mmu->pgt = NULL | < invalidate MMU > | ... | < release kvm->mmu_lock > [ scheduled ] | stage2_apply_range() | < loop to next > | get, mmu->pgt, check !NULL | is NULL, return -EINVAL | __unmap_stage2_range() | WARN_ON(-EINVAL) <--- entirely spurious - the race was handled correctly. Fix the spurious warning by updating stage2_apply_range() to no longer treat concurrent PGT teardown on lock release as an error - whether the walker is tearing down page tables or doing something else this is a legitimate reason to abort the operation without error. This keeps the warning in place for all other circumstances. In practice only __unmap_stage2_range() actually does anything with the error so this only impacts that.
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
arch/arm64/kvm/mmu.c
- What this is
- KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)MAINTAINERS section matched on arch/arm64/kvm/ · linux-arm-kernel@lists.infradead.org · Maintained
- Kernel module
- kvm
Check it on the machine
grep -w CONFIG_KVM /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w kvmPrints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.
- bookwormBnot built on arm64/rt/arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
- trixieBnot built on armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
- forky, sidBnot built on armhf/armmp, armhf/armmp-lpae
- B
- built in on some, a module on others, absent on the rest
- Build switch
- CONFIG_KVM
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-10-18 (today)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- not scored
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- unimportantsource
- Subsystem
- arch/arm64
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 6.11 | 6.12.112 | f44a92633136 |
| 6.11 | 6.18.55 | c23ed110d27b |
| 6.11 | 7.2.9 | 330346dda3bf |
| 6.11 | 7.3 | 38b70fc453c3 |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-98468, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.