CVE-2026-98307

What the bug is

When mac80211 removes a sta, it calls .sta_state() which in turn calls ath11k_mac_station_remove(). In that function we clean up both peers & arsta related resources. But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which assumes that all driver related resources are cleaned up beforehand. This cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not in fact free arsta->rx_stats / tx_stats. Extract the arsta cleanup from ath11k_mac_station_remove() into a new ath11k_mac_station_cleanup() and call it from both there and ath11k_mac_peer_cleanup_all(). This should handle kmemleaks reports like: unreferenced object 0xffffff801ae66400 (size 1024): comm "hostapd", pid 1306, jiffies 4295011565 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc d61c08ec): kmemleak_alloc+0x3c/0x50 __kmalloc_cache_noprof+0x2b0/0x3e0 ath11k_mac_op_sta_state+0x1dc/0xb10 drv_sta_state+0xac/0x6f8 sta_info_insert_rcu+0x314/0x5e0 sta_info_insert+0x14/0x38 ieee80211_add_station+0x10c/0x1a0 nl80211_new_station+0x3e8/0x680 genl_family_rcv_msg_doit+0xc0/0x120 genl_rcv_msg+0x1b4/0x258 netlink_rcv_skb+0x4c/0x108 genl_rcv+0x38/0x60 netlink_unicast+0x190/0x278 netlink_sendmsg+0x15c/0x370 ____sys_sendmsg+0x120/0x290 ___sys_sendmsg+0x70/0xa0 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/net/wireless/ath/ath11k/mac.c

What this is

QUALCOMM ATHEROS ATH11K WIRELESS DRIVERMAINTAINERS section matched on drivers/net/wireless/ath/ath11k/ · linux-wireless@vger.kernel.org · Supported

Kernel module

ath11k

Check it on the machine

grep -wE 'CONFIG_ATH11K|CONFIG_WLAN|CONFIG_WLAN_VENDOR_ATH' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w ath11k

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64
• trixie, forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64, s390x/s390x

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_ATH11K, CONFIG_WLAN, CONFIG_WLAN_VENDOR_ATH

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-10-06 (13 days ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.18%, higher than 6.6% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/net

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
5.6	6.12.112	c4108dce0838
5.6	6.18.54	57bc3cd46458
5.6	7.2.8	be1d5e95ec49
5.6	7.3	820b8cff81c7

Debian advisories