CVE-2026-98265

What the bug is

data_ep_set_params() allocates each data URB for exactly u->packets isochronous frames, so urb->iso_frame_desc[] has u->packets slots and ctx->packets is the driver's only record of that limit. For an implicit feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the sync source's packet count, which is calculated independently from the capture endpoint's parameters. When that count is larger, prepare_playback_urb() and prepare_silent_urb() can write iso_frame_desc[] past the allocation; their existing bounds limit payload bytes, not the descriptor index. The reproducer uses a high-speed UAC2 device declaring bInterval 1 for implicit feedback capture (8 packets) and bInterval 4 for playback (1 packet). On the first capture completion after the stream starts, it accesses seven descriptors spanning 112 bytes beyond the one-packet URB: BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560) Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178 prepare_playback_urb (sound/usb/pcm.c:1560) prepare_outbound_urb (sound/usb/endpoint.c:340) snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501) snd_complete_urb (sound/usb/endpoint.c:1834) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107) kthread (kernel/kthread.c:436) The buggy address belongs to the object at ffff88801e696a00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0) Record the allocated packet count per endpoint and clamp both the adopted count and the packet-size copy to it. Fold the Format Type II delimiter into urb_packs before the allocation loop so the recorded limit matches every URB.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

sound/usb/card.h
sound/usb/endpoint.c

What this is

SOUNDMAINTAINERS section matched on sound/ · linux-sound@vger.kernel.org · Maintained

Kernel module

snd_usb_audio

Check it on the machine

grep -wE 'CONFIG_SND|CONFIG_SND_USB_AUDIO' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w snd_usb_audio

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookworm, trixie, forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_SND, CONFIG_SND_USB_AUDIO

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-10-06 (13 days ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.18%, higher than 6.6% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

sound/usb

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
6.12.75	6.12.112	ad279ba0dc17
6.18.16	6.18.54	79c55a7b5d71
7.0	7.2.8	ab77e3f453c5
7.0	7.3	76a986c980bb
5.15.202	0	0
6.1.165	0	0
6.6.128	0	0
6.19.6	0	0

Debian advisories