Look up another CVE · open CVE-2026-98192 in the interactive tracker
CVE-2026-98192
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
Published 2026-10-06 (13 days ago) by the Linux kernel CNA. Subsystem drivers/net. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-98192 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | vulnerable | 6.1.190-1 | No fix published anywhere yet, neither in Debian nor upstream for the series bookworm tracks. Watch the Debian tracker page for this CVE. Advisories for bookworm have historically landed a median of 23 days after publication. |
| Debian 13trixie | fixedDSA-6568-1 · 2026-10-16 · text | 6.12.113-1 | Update the kernel and reboot. DSA-6568-1 shipped the fix on 2026-10-16, in 6.12.113-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.2.8-1 | Update the kernel and reboot. Fixed in 7.2.8-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.2.8-1 | Update the kernel and reboot. Fixed in 7.2.8-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(), which only dequeues the timer and does not wait for a callback that is already executing; the preceding free_irq() calls synchronize the interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can therefore be running past the teardown and use the wcn freed along with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock, reads wcn->tx_ack_skb and passes wcn->hw to ieee80211_tx_status_irqsafe(). Fix this by using timer_shutdown_sync(), which waits for a running callback and also prevents the timer from being rearmed again. The timer is set up again by wcn36xx_dxe_init() on the next start, so the start/stop cycle is unaffected. This issue was found by an in-house static analysis tool.
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
drivers/net/wireless/ath/wcn36xx/dxe.c
- What this is
- QUALCOMM WCN36XX WIRELESS DRIVERMAINTAINERS section matched on drivers/net/wireless/ath/wcn36xx/ · wcn36xx@lists.infradead.org · Supported
- Kernel module
- wcn36xx
Check it on the machine
grep -wE 'CONFIG_WCN36XX|CONFIG_WLAN|CONFIG_WLAN_VENDOR_ATH' /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w wcn36xxPrints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.
- bookwormMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
- trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- M
- a module where it is built at all; some flavours do not build it
- Build switches
- CONFIG_WCN36XX, CONFIG_WLAN, CONFIG_WLAN_VENDOR_ATH
- Reads as
- all on means the file is compiled; any one off means it is not.
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-10-06 (13 days ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.18%, higher than 6.6% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- drivers/net
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 5.10 | 6.12.112 | 3edabc965bcc |
| 5.10 | 6.18.54 | 2bddc5d088cf |
| 5.10 | 7.2.8 | c0df0878e911 |
| 5.10 | 7.3 | d9be5e755307 |
Debian advisories
| Advisory | Date | Shipped to | Debian |
|---|---|---|---|
| DSA-6568-1 | 2026-10-16 | trixie 6.12.113-1 | tracker |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-98192, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.