CVE-2026-98069

What the bug is

rds_conn_shutdown() quiesces the transmit and receive-refill paths by waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and then runs the transport shutdown and rds_conn_path_reset(). Sampling the bits clear is not the same as owning them: the moment after the wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run concurrently with the teardown. The sender does recheck the connection state after taking the lock, but that recheck is a classic store-buffering pattern: teardown writes the state and reads the bit while the sender writes the bit and reads the state. acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write, and the transmit path then runs while the transport zeroes its rings (e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the transmit state under it. Oracle UEK fixed the same class of crashes - a 14-year tail of BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL dereferences in rds_ib_send_cqe_handler() during failover testing - by making the teardown path *acquire* the fastpath bit locks instead of testing them ("rds: Make sure transmit path and connection tear-down does not run concurrently"). Ownership of a single word is decided by RMW atomicity, so no cross-variable ordering is needed. Do the same here: take both locks before calling the transport shutdown, hold them across rds_conn_path_reset(), and release them explicitly with a wake-up afterwards. Both are released with clear_bit_unlock(), so that the ring re-initialization done by the transport shutdown and the transmit state rewritten by rds_send_path_reset() are ordered before either bit is seen clear by the next acquire_in_xmit() or acquire_refill(). The fastpath users of these bits - rds_send_xmit() and rds_ib_recv_refill() - are trylock style and back off while teardown owns the locks, so no new lock dependency is introduced for them. rds_tcp_reset_callbacks() is different: since the previous patch it acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now spans the teardown instead of at most one send batch. That waiter runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so a duelling SYN accepted while its path is being torn down parks accept processing for the duration of the teardown - for TCP bounded by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB path's drain in rds_ib_conn_path_shutdown() has no round cap, but no blocking waiter either: rds_tcp_reset_callbacks() is the only blocking acquirer of these bits and waits only on its own TCP path, and the fastpaths are trylock-and-back-off on both transports, so a long IB drain lengthens only that path's own quiesce. The window is narrow: the accept-side state check has to pass before the teardown moves the path to RDS_CONN_DISCONNECTING. Because krdsd is a single global workqueue, everything else queued there - accept processing for other connections and network namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop() during namespace teardown - waits behind the parked accept worker for that time. It cannot deadlock, although the waits do point at each other: the teardown blocks until the bit's holder releases it, and the holder may be that krdsd accept worker. The holder finishes without needing anything the teardown owns: the sync cancels rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on the path's ordered cp_wq, whose only execution slot is occupied by the blocked cp_down_w itself, so they are pending at most and cancel without flushing - a reliance on cp_wq being ordered that is now noted next to those cancels (on ---truncated---

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

net/rds/connection.c
net/rds/ib_recv.c
net/rds/send.c
net/rds/tcp.c

What this is

RDS - RELIABLE DATAGRAM SOCKETSMAINTAINERS section matched on net/rds/ · netdev@vger.kernel.org · Supported

Kernel module

rds

Check it on the machine

grep -w CONFIG_RDS /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w rds

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this as a loadable module. Every release below compiles it as a module on every flavour, so whether the code is in the running kernel depends on whether that module is loaded.

• bookworm, trixie, forky, sid, bookworm · linux-6.12m

m

a loadable module on every flavour - check lsmod, can be blacklisted

Build switch

CONFIG_RDS

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-09-25 (24 days ago)source

CVSS

8.1 high
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:Hsource recompute it

Attack vector

network (AV:N)source

EPSS

0.57%, higher than 46.0% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

net/rds

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
2.6.37	5.10.271	7f4f21e4439d
2.6.37	5.15.222	1f900f585cbb
2.6.37	6.1.189	32e21bcf4b5b
2.6.37	6.6.158	2e46248e375a
2.6.37	6.12.111	7febb113795d
2.6.37	6.18.53	900e96c9749a
2.6.37	7.2.7	1fe627e5db5c
2.6.37	7.3	813f3582ac7a

Debian advisories