CVE-2026-93800

What the bug is

If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated---

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

fs/btrfs/relocation.c

What this is

BTRFS FILE SYSTEMMAINTAINERS section matched on fs/btrfs/ · linux-btrfs@vger.kernel.org · Maintained

Kernel module

btrfs

Check it on the machine

grep -w CONFIG_BTRFS_FS /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w btrfs

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this as a loadable module. Every release below compiles it as a module on every flavour, so whether the code is in the running kernel depends on whether that module is loaded.

• bookworm, trixie, forky, sid, bookworm · linux-6.12m

m

a loadable module on every flavour - check lsmod, can be blacklisted

Build switch

CONFIG_BTRFS_FS

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-09-24 (24 days ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.17%, higher than 6.2% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

fs/btrfs

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
5.10.36	5.10.271	5a247097c5f9
5.13	5.15.222	6372dd394ea9
5.13	6.1.189	9f599d120b2b
5.13	6.6.158	a01837ae174a
5.13	6.12.111	97a540d72ebc
5.13	6.18.53	fda1b6636ff1
5.13	7.2	83201804efa4
5.11.20	0	0
5.12.3	0	0

Debian advisories