data built 2026-10-19T13:16:53Z

Look up another CVE · open CVE-2026-93142 in the interactive tracker

CVE-2026-93142

thermal/drivers/rcar: Fix error checking in probe()

EPSS 0.2%

Published 2026-09-17 (31 days ago) by the Linux kernel CNA. Subsystem drivers/thermal. Debian urgency: not yet assigned.

What to do, per Debian release

Debian's own status for CVE-2026-93142 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source

ReleaseStatus VersionWhat this means
Debian 12bookwormfixedDLA-4841-1 · 2026-10-17 · text6.1.190-1Update the kernel and reboot. DLA-4841-1 shipped the fix on 2026-10-17, in 6.1.190-1. A running kernel keeps the old code until the machine restarts.
Debian 13trixiefixedDSA-6528-1 · 2026-09-29 · text6.12.111-1Update the kernel and reboot. DSA-6528-1 shipped the fix on 2026-09-29, in 6.12.111-1. A running kernel keeps the old code until the machine restarts.
Debian 14forkyfixed7.2.6-1Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts.
Debian unstablesidfixed7.2.6-1Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts.
Debian 12bookworm · linux-6.12fixedDLA-4817-1 · 2026-10-04 · text6.12.111-1~deb12u1Update the kernel and reboot. DLA-4817-1 shipped the fix on 2026-10-04, in 6.12.111-1~deb12u1. A running kernel keeps the old code until the machine restarts.

The vulnerability

What the bug is

This code accidentally calls thermal_zone_device_enable() before checking whether thermal_zone_device_register_with_trips() failed. Move the call until later to avoid an error pointer dereference of "priv->zone". The driver works differently depending on if we are using OF thermal or not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and call thermal_zone_device_enable() if not. We can share same error check for if either of these fail. Moving the thermal_zone_device_enable() call is a bit cleaner as well. The original code used a three step process to cleanup: 1. Call thermal_zone_device_unregister() to cleanup. 2. Set priv->zone to an error pointer to preserve the error code. 3. Set priv->zone to NULL to avoid a second call to thermal_zone_device_unregister() in the rcar_thermal_remove() function. Now we can just do a direct goto error_unregister and rcar_thermal_remove() handles the cleanup properly.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/thermal/renesas/rcar_thermal.c

What this is
RENESAS R-CAR THERMAL DRIVERSMAINTAINERS section matched on drivers/thermal/renesas/rcar_thermal.c · linux-renesas-soc@vger.kernel.org · Supported

Check it on the machine

grep -wE 'CONFIG_RCAR_THERMAL|CONFIG_THERMAL' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

Show whether Debian builds this, per release

Debian does not build this code in 4 releases. The build rule could not be established for 1 release, so nothing is claimed about those.

  • bookworm?
  • trixie, forky, sid, bookworm · linux-6.12n
?
not established - no Makefile entry for the affected file
n
not enabled on any flavour - this release does not build the code

Where a release above reads "not established", no build rule for the affected file was found in that release's kernel tree. That is a gap in this lookup, not a finding that the code is absent.

Build switches
CONFIG_RCAR_THERMAL, CONFIG_THERMAL
Reads as
all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published
2026-09-17 (31 days ago)source
CVSS
no vector published, unrated
Attack vector
not published
EPSS
0.21%, higher than 11.0% of all CVEssource
CISA KEV
not listedthe KEV catalogue
Debian urgency
not yet assignedsource
Subsystem
drivers/thermal

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

IntroducedFixed inCommit
5.96.1.188a85bcd0c7ef6
5.96.6.157810875c5996f
5.96.12.110623349a18d4c
5.96.18.5235bf61798e7d
5.97.2.6d67607e77495
5.97.3dd04ad1cdabc

Debian advisories

AdvisoryDateShipped toDebian
DLA-4841-12026-10-17bookworm 6.1.190-1tracker
DLA-4817-12026-10-04bookworm 6.12.111-1~deb12u1tracker
DSA-6528-12026-09-29trixie 6.12.111-1tracker

Why the CNA scored it this way

The kernel CNA published no CVSS vector and no reasoning for CVE-2026-93142, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.