Look up another CVE · open CVE-2026-93123 in the interactive tracker
CVE-2026-93123
serial: qcom-geni: do not advance stale DMA completions
Published 2026-09-17 (31 days ago) by the Linux kernel CNA. Subsystem drivers/tty. Debian urgency: unimportant.
What to do, per Debian release
Debian's own status for CVE-2026-93123 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | not affected | 6.1.190-1 | Nothing to do. bookworm never shipped the vulnerable code. |
| Debian 13trixie | fixedDSA-6528-1 · 2026-09-29 · text | 6.12.111-1 | Update the kernel and reboot. DSA-6528-1 shipped the fix on 2026-09-29, in 6.12.111-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.2.6-1 | Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.2.6-1 | Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts. |
| Debian 12bookworm · linux-6.12 | fixedDLA-4817-1 · 2026-10-04 · text | 6.12.111-1~deb12u1 | Update the kernel and reboot. DLA-4817-1 shipped the fix on 2026-10-04, in 6.12.111-1~deb12u1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
The qcom GENI serial DMA TX completion path advances the transmit fifo by the number of bytes recorded in port->tx_remaining. If uart_flush_buffer() runs after the hardware has completed a DMA transfer but before the DMA completion interrupt has been handled, the serial core resets the transmit fifo while port->tx_remaining still describes the old DMA transfer. A previous fix avoided advancing an empty fifo by checking that the fifo length is at least tx_remaining. That still does not distinguish the old DMA payload from new bytes written after the flush. If userspace writes new data before the stale DMA completion interrupt is handled, the fifo can again contain at least tx_remaining bytes and the stale completion can advance and discard those new bytes. Mark an in-flight DMA transfer stale when the transmit fifo is flushed. The later completion still unprepares the original DMA mapping using the saved length, but it no longer advances the transmit fifo.
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
drivers/tty/serial/qcom_geni_serial.c
- What this is
- ARM/QUALCOMM MAILING LISTMAINTAINERS section matched on drivers/*/*/qcom* · linux-arm-msm@vger.kernel.org
Check it on the machine
grep -w CONFIG_SERIAL_QCOM_GENI /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
Show whether Debian builds this, per release
Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.
- bookwormYnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
- trixieYnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- forky, sidYnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- bookworm · linux-6.12Ynot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k
- Y
- built in where it is built at all; some flavours do not build it
- Build switch
- CONFIG_SERIAL_QCOM_GENI
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-09-17 (31 days ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.21%, higher than 10.3% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- unimportantsource
- Subsystem
- drivers/tty
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 6.3 | 6.12.110 | 231c84fe7ec4 |
| 6.3 | 6.18.52 | c02d030747c4 |
| 6.3 | 7.2.6 | 59faa59c25a0 |
| 6.3 | 7.3 | 7ea38c49e717 |
Debian advisories
| Advisory | Date | Shipped to | Debian |
|---|---|---|---|
| DLA-4817-1 | 2026-10-04 | bookworm 6.12.111-1~deb12u1 | tracker |
| DSA-6528-1 | 2026-09-29 | trixie 6.12.111-1 | tracker |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-93123, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.