Look up another CVE · open CVE-2026-92500 in the interactive tracker
CVE-2026-92500
ext4: use fsdata to track inline data write state and fix race
Published 2026-09-17 (31 days ago) by the Linux kernel CNA. Subsystem fs/ext4. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-92500 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | vulnerable | 6.1.190-1 | No fix published anywhere yet, neither in Debian nor upstream for the series bookworm tracks. Watch the Debian tracker page for this CVE. Advisories for bookworm have historically landed a median of 23 days after publication. |
| Debian 13trixie | vulnerable | 6.12.113-1 | No fix published anywhere yet, neither in Debian nor upstream for the series trixie tracks. Watch the Debian tracker page for this CVE. Advisories for trixie have historically landed a median of 11 days after publication. |
| Debian 14forky | fixed | 7.2.6-1 | Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.2.6-1 | Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
Instead of checking the live inode state (ext4_has_inline_data(inode) and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the write_end handlers, use the fsdata parameter of the address space operations to explicitly pass down the state in which write_begin prepared the write. A concurrent thread (such as ext4_page_mkwrite()) can convert the inline data to an extent between write_begin and write_end. If this happens, the write_end handlers would previously miss the inline write_end path and fall through to extent-based write_end logic. However, since block buffers were never allocated in write_begin, this resulted in NULL pointer dereferences or data loss because folio_buffers(folio) was NULL. Define EXT4_WRITE_DATA_INLINE (4) as a bit flag (Bit 2), treating fsdata as bitwise flags rather than mutually exclusive enums to keep states of the write path independent. Communicate this state via fsdata: 1) ext4_write_begin() and ext4_da_write_begin() set the EXT4_WRITE_DATA_INLINE bit in *fsdata via bitwise OR when an inline write is successfully prepared. 2) On entry, ext4_write_begin() clears the EXT4_WRITE_DATA_INLINE bit to safely handle VFS retries (where generic_perform_write() bypasses the fsdata initialization on its retry jump). 3) The write_end handlers perform a bitwise AND to check if the EXT4_WRITE_DATA_INLINE bit is set and invoke the inline write_end helper accordingly. Furthermore, during a buffered write, ext4_write_inline_data_end() acquires the xattr lock after preparing the write. If a concurrent page fault (ext4_page_mkwrite()) converts the inline data to an extent after the write_end handlers check the state but before ext4_write_inline_data_end() acquires the xattr write lock, the subsequent check will trigger a kernel panic via BUG_ON(!ext4_has_inline_data(inode)). To keep git history working and bisectability clean, replace the BUG_ON check in ext4_write_inline_data_end() with a graceful error- handling retry path in this same commit. If the inline data is cleared after locking the xattr, we safely release all resources (releasing iloc.bh, unlocking/putting the folio, stopping the active journal transaction handle) and return 0 (VFS retry) to let the generic write path retry the operation safely.
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
fs/ext4/ext4.h
fs/ext4/inline.c
fs/ext4/inode.c
- What this is
- EXT4 FILE SYSTEMMAINTAINERS section matched on fs/ext4/ · linux-ext4@vger.kernel.org · Maintained
- Kernel module
- ext4
Check it on the machine
grep -w CONFIG_EXT4_FS /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w ext4Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian builds this code. Every release below compiles the affected file into the kernels it ships.
- bookworm, trixie, forky, sidb
- b
- built in on some flavours, a module on others
- Build switch
- CONFIG_EXT4_FS
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-09-17 (31 days ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.22%, higher than 11.5% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- fs/ext4
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 3.8 | 6.18.52 | bd8d74bd46d0 |
| 3.8 | 7.2.6 | 439aedfd7ae8 |
| 3.8 | 7.3 | 7edbb323bab2 |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-92500, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.