Look up another CVE · open CVE-2026-90173 in the interactive tracker
CVE-2026-90173
smb: smbdirect: free completion queues with ib_free_cq()
Published 2026-09-17 (31 days ago) by the Linux kernel CNA. Subsystem fs/smb. Debian urgency: unimportant.
What to do, per Debian release
Debian's own status for CVE-2026-90173 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | not affected | 6.1.190-1 | Nothing to do. bookworm never shipped the vulnerable code. |
| Debian 13trixie | not affected | 6.12.113-1 | Nothing to do. trixie never shipped the vulnerable code. |
| Debian 14forky | fixed | 7.2.6-1 | Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.2.6-1 | Update the kernel and reboot. Fixed in 7.2.6-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
smbdirect_connection_destroy_qp() creates the send and receive completion queues with ib_alloc_cq_any(), which for IB_POLL_WORKQUEUE arms an internal completion handler that runs ib_cq_poll_work() on a workqueue. Tearing those CQs down with ib_destroy_cq() frees them without first cancelling that poll work. If the provider posts a completion late -- for example Soft-RoCE (rxe) posting an RNR error from rxe_receiver() after rdma_destroy_qp() -- the handler re-queues ib_cq_poll_work() on the already-freed CQ, and a follow-on access faults in rxe_req_notify_cq(). Use ib_free_cq(), which cancel_work_sync()es the poll work before freeing the CQ, so no completion handler can run against a freed queue. [ 1236.599526] ================================================================== [ 1236.602142] BUG: KASAN: slab-use-after-free in ib_cq_poll_work+0xd0/0x1a0 [ 1236.605524] Read of size 8 at addr ffff888111865800 by task kworker/4:1H/82 [ 1236.609017] [ 1236.609270] CPU: 4 UID: 0 PID: 82 Comm: kworker/4:1H Not tainted 7.2.0-rc3-next-20260717-virtme #110 PREEMPT(lazy) [ 1236.609287] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 1236.609498] Workqueue: ib-comp-wq ib_cq_poll_work [ 1236.609525] Call Trace: [ 1236.609536] <TASK> [ 1236.609545] __dump_stack+0x21/0x60 [ 1236.609562] dump_stack_lvl+0xc2/0x100 [ 1236.609573] print_address_description+0x77/0x200 [ 1236.609587] ? ib_cq_poll_work+0xd0/0x1a0 [ 1236.609597] print_report+0x58/0x70 [ 1236.609607] kasan_report+0x117/0x150 [ 1236.609623] ? ib_cq_poll_work+0xd0/0x1a0 [ 1236.609636] ? process_scheduled_works+0x954/0x1600 [ 1236.609650] ib_cq_poll_work+0xd0/0x1a0 [ 1236.609662] ? process_scheduled_works+0x954/0x1600 [ 1236.609674] process_scheduled_works+0xc22/0x1600 [ 1236.609698] ? __pfx_process_scheduled_works+0x10/0x10 [ 1236.609713] ? __pfx_assign_work+0x10/0x10 [ 1236.609726] ? lock_is_held_type+0x7b/0x110 [ 1236.609741] worker_thread+0x975/0xee0 [ 1236.609757] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 1236.609775] ? __kthread_parkme+0x21e/0x260 [ 1236.609789] kthread+0x3a6/0x490 [ 1236.609800] ? __pfx_worker_thread+0x10/0x10 [ 1236.609809] ? __pfx_kthread+0x10/0x10 [ 1236.609820] ret_from_fork+0x55a/0xa20 [ 1236.609835] ? __pfx_ret_from_fork+0x10/0x10 [ 1236.609850] ? __pfx_kthread+0x10/0x10 [ 1236.609861] ret_from_fork_asm+0x1a/0x30 [ 1236.609880] </TASK> [ 1236.609886] [ 1236.661292] Allocated by task 5076: [ 1236.662640] kasan_save_track+0x3e/0x80 [ 1236.663842] __kasan_kmalloc+0x72/0x90 [ 1236.664763] __kmalloc_noprof+0x2b0/0x5d0 [ 1236.665356] __ib_alloc_cq+0x284/0x1000 [ 1236.666573] __ib_alloc_cq_any+0x23e/0x340 [ 1236.668654] smbdirect_connection_create_qp+0x6f7/0x1070 [ 1236.669757] smbdirect_accept_connect_request+0x500/0x1ca0 [ 1236.672625] smbdirect_listen_rdma_event_handler+0x1655/0x1c50 [ 1236.673930] cma_listen_handler+0x1bf/0x260 [ 1236.674923] cma_cm_event_handler+0x128/0x380 [ 1236.676926] cma_ib_req_handler+0x2d3d/0x4de0 [ 1236.678368] cm_process_work+0xb0/0x530 [ 1236.680454] cm_queue_work_unlock+0xb1/0x230 [ 1236.681673] cm_work_handler+0x969f/0xdca0 [ 1236.682704] process_scheduled_works+0xc22/0x1600 [ 1236.683447] worker_thread+0x975/0xee0 [ 1236.685901] kthread+0x3a6/0x490 [ 1236.688164] ret_from_fork+0x55a/0xa20 [ 1236.689522] ret_from_fork_asm+0x1a/0x30 [ 1236.690073] [ 1236.690378] Freed by task 5137: [ 1236.692242] kasan_save_track+0x3e/0x80 [ 1236.694272] kasan_save_free_info+0x40/0x50 [ 1236.695514] __kasan_slab_free+0x3a/0x60 [ 1236.696773] kfree+0x14e/0x4e0 [ 1236.697216] ib_destroy_cq_user+0x18d/0x250 [ 1236.699817] smbdirect_connection_destroy_qp+0xf2/0x280 [ 1236.702115] smbdirect_socket_destroy_sync+0x1607/0x2720 [ 1236.704062] smbdirect_socket_release+0x140/0x280 [ 1236.705286] smb_direct_free_transpor ---truncated---
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
fs/smb/smbdirect/connection.c
- What this is
- SMBDIRECT (RDMA Stream Transport with Read/Write-Offload, MS-SMBD)MAINTAINERS section matched on fs/smb/smbdirect/ · linux-cifs@vger.kernel.org · Maintained
Check it on the machine
grep -wE 'CONFIG_SMBDIRECT|CONFIG_SMBFS' /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
Show whether Debian builds this, per release
Debian does not build this code in 2 releases. The build rule could not be established for 2 releases, so nothing is claimed about those.
- bookworm, trixie?
- forky, sidn
- ?
- not established - no Makefile entry for the affected file
- n
- not enabled on any flavour - this release does not build the code
Where a release above reads "not established", no build rule for the affected file was found in that release's kernel tree. That is a gap in this lookup, not a finding that the code is absent.
- Build switches
- CONFIG_SMBDIRECT, CONFIG_SMBFS
- Reads as
- all on means the file is compiled; any one off means it is not.
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-09-17 (31 days ago)source
- CVSS
- 9.8 critical
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsource recompute it - Attack vector
- network (AV:N)source
- EPSS
- 0.55%, higher than 45.0% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- unimportantsource
- Subsystem
- fs/smb
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 7.1 | 7.2.6 | 8a953b1a47ff |
| 7.1 | 7.3 | fe2c0cacbcff |
Why the CNA scored it this way
Quoted from the kernel CNA's own scoring file, word for word. A highlighted metric carries the most severe value CVSS v3.1 defines for it, which is what pushes the score up. source
- AV:NAttack vector, network
- A remote InfiniBand CM CONNECT_REQUEST handled by smbdirect_listen_rdma_event_handler() reaches smbdirect_accept_connect_request(), which allocates the CQs; the same peer's later RDMA packets make rxe_receiver() post a completion after rdma_destroy_qp(), use-after-freeing them. ksmbd listens for this on RoCE/IB port 445 and iWARP port 5445.
- AC:LAttack complexity, low
- The attacker controls both sides: they send the CONNECT_REQUEST that creates the CQs in smbdirect_connection_create_qp(), then disconnect or keep sending RDMA packets so rxe_receiver() queues ib_cq_poll_work() while smbdirect_connection_destroy_qp() frees the CQ with ib_destroy_cq() instead of ib_free_cq(), skipping cancel_work_sync().
- PR:NPrivileges required, none
- CQ allocation runs in smbdirect_accept_connect_request() on the unauthenticated RDMA CM CONNECT_REQUEST path, before SMB Direct negotiate completes and before any SMB2 SESSION_SETUP. Connection teardown through __ksmbd_conn_release_work() likewise needs no credentials.
- UI:NUser interaction, none
- The attacker alone sends the RDMA CM CONNECT_REQUEST to the ksmbd listener started by smb_direct_listen() and later drops that connection so ksmbd_conn_handler_loop() calls smbdirect_connection_destroy_qp(); no local user mount, click, or prompt is required.
- S:UScope, unchanged
- The use-after-free is of the kernel struct ib_cq allocated by __ib_alloc_cq() and later touched by ib_cq_poll_work() on the same host; it does not cross a VM, IOMMU, or sandbox boundary.
- C:HConfidentiality impact, high
- ib_cq_poll_work() reads a kmalloc-freed struct ib_cq (cq->wc and cq->device) after ib_destroy_cq_user(); reclaiming that slab object lets the attacker supply a fake ib_device and obtain a kernel read primitive through the poll/notify path.
- I:HIntegrity impact, high
- The same reclaimed ib_cq is used as cq->device->ops.poll_cq and req_notify_cq from ib_cq_poll_work(), so a sprayed fake ops table yields a kernel function-pointer hijack, not merely a crash.
- A:HAvailability impact, high
- The demonstrated KASAN use-after-free in ib_cq_poll_work() and the follow-on oops in rxe_req_notify_cq() crash the kernel; a remote peer can repeat connect-and-teardown against the ksmbd SMB Direct listener.