CVE-2026-89999

What the bug is

wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); } Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is: INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285] (the touchring byte), so the report must be at least 286 bytes; INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45], so the report must be at least 46 bytes. features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer. This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling wacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing. Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/hid/wacom_wac.c

What this is

HID WACOM DRIVERMAINTAINERS section matched on drivers/hid/wacom_* · linux-input@vger.kernel.org · Maintained

Kernel module

wacom

Check it on the machine

grep -wE 'CONFIG_HID|CONFIG_HID_SUPPORT|CONFIG_HID_WACOM' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w wacom

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookworm, trixie, forky, sid, bookworm · linux-6.12Mnot built on amd64/cloud-amd64, arm64/cloud-arm64

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_HID, CONFIG_HID_SUPPORT, CONFIG_HID_WACOM

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-09-16 (33 days ago)source

CVSS

8.1 high
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:Hsource recompute it

Attack vector

adjacent network (AV:A)source

EPSS

0.36%, higher than 28.2% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/hid

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
4.11	5.10.270	d2844f3fcd05
4.11	5.15.221	1bfc0547b81d
4.11	6.1.188	84781a1f3c5d
4.11	6.6.157	96dd0af7597a
4.11	6.12.110	114af803e409
4.11	6.18.51	74ec08f7b81c
4.11	7.2.5	0cdc6cb242dd
4.11	7.3	a8e04f3f894c

Debian advisories