CVE-2026-89865

What the bug is

The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/scsi/qla2xxx/qla_bsg.c

What this is

QLOGIC QLA2XXX FC-SCSI DRIVERMAINTAINERS section matched on drivers/scsi/qla2xxx/ · linux-scsi@vger.kernel.org · Supported

Kernel module

qla2xxx

Check it on the machine

grep -w CONFIG_SCSI_QLA_FC /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w qla2xxx

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
• trixieMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, s390x/s390x
• forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, s390x/s390x
• bookworm · linux-6.12Mnot built on amd64/cloud-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp

M

a module where it is built at all; some flavours do not build it

Build switch

CONFIG_SCSI_QLA_FC

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-09-16 (33 days ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.21%, higher than 10.6% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/scsi

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
3.2	5.10.270	a476377a6689
3.2	5.15.221	09703bc7c0be
3.2	6.1.188	97c45c75f5cd
3.2	6.6.157	84bde5ce4038
3.2	6.12.110	581590f560b7
3.2	6.18.51	b157256c2808
3.2	7.2.5	a5501c422562
3.2	7.3	b47d4a1547d9

Debian advisories