CVE-2026-81005

What the bug is

try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path, ipmi_add_smi() logs "Unable to get the device id" and goes to out_err_started, where it invokes the lower driver's shutdown callback. try_smi_init() then logs the returned registration failure: ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5 ipmi_si IPI0001:00: Unable to register device: error -5 For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up the SI state machine data, frees smi_info->si_sm, and sets smi_info->si_sm and smi_info->intf to NULL. However, intf->in_shutdown is not set on this failed-registration rollback path. Therefore, the asynchronous redo_bmc_reg work item can still retry BMC device-id probing after the lower driver has already cleared its SI state machine data. In the observed case, that retry path reached start_next_msg(), which passed the NULL smi_info->si_sm pointer to the selected KCS state machine handler: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Workqueue: events redo_bmc_reg [ipmi_msghandler] RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si] Call Trace: start_next_msg+0x50/0x80 [ipmi_si] check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si] sender+0x69/0x80 [ipmi_si] i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler] __get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler] __bmc_get_device_id+0xef/0x950 [ipmi_msghandler] redo_bmc_reg+0x52/0x60 [ipmi_msghandler] process_one_work+0x1a7/0x360 Set intf->in_shutdown on the out_err_started path before invoking the lower driver's shutdown callback. This prevents later redo_bmc_reg retries from using an interface whose lower driver state has been cleaned up, and applies the same shutdown state to other IPMI interfaces as well.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/char/ipmi/ipmi_msghandler.c

What this is

IPMI SUBSYSTEMMAINTAINERS section matched on drivers/char/ipmi/ · openipmi-developer@lists.sourceforge.net · Supported

Kernel module

ipmi_msghandler

Check it on the machine

grep -w CONFIG_IPMI_HANDLER /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w ipmi_msghandler

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
• trixieMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, riscv64/riscv64, s390x/s390x
• forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, riscv64/riscv64, s390x/s390x
• bookworm · linux-6.12Mnot built on amd64/cloud-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp

M

a module where it is built at all; some flavours do not build it

Build switch

CONFIG_IPMI_HANDLER

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-09-11 (37 days ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.18%, higher than 6.8% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/char

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
4.19	5.10.270	75ecc80ef061
4.19	5.15.221	b11a1e545ad7
4.19	6.1.188	f390b0e781ca
4.19	6.6.157	d377bf743f29
4.19	6.12.109	d4be659a3e56
4.19	6.18.50	53af3a8bae0a
4.19	7.2.4	8ada17dd4c4f
4.19	7.3	6d920a75df9a
4.18.10	0	0

Debian advisories