data built 2026-10-19T13:16:53Z

Look up another CVE · open CVE-2026-80818 in the interactive tracker

CVE-2026-80818

iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown

EPSS 0.2%

Published 2026-09-04 (44 days ago) by the Linux kernel CNA. Subsystem drivers/iommu. Debian urgency: unimportant.

What to do, per Debian release

Debian's own status for CVE-2026-80818 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source

ReleaseStatus VersionWhat this means
Debian 12bookwormnot affected6.1.190-1Nothing to do. bookworm never shipped the vulnerable code.
Debian 13trixienot affected6.12.113-1Nothing to do. trixie never shipped the vulnerable code.
Debian 14forkyfixed7.1.12-1Update the kernel and reboot. Fixed in 7.1.12-1. A running kernel keeps the old code until the machine restarts.
Debian unstablesidfixed7.1.12-1Update the kernel and reboot. Fixed in 7.1.12-1. A running kernel keeps the old code until the machine restarts.

The vulnerability

What the bug is

arm_smmu_impl_remove() is registered as a devres action in arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an unbind, the queue is freed first and arm_smmu_impl_remove() then runs tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on the freed memory. Observed during testing with a QEMU hack that makes the VCMDQ fail to enable, so the impl reset fails and probe aborts into the devres unwind: platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110 Unable to handle kernel paging request at virtual address ffff8000891e0098 ... Internal error: Oops: 0000000096000047 [#1] SMP ... Call trace: arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P) tegra241_vcmdq_hw_deinit+0x98/0x168 tegra241_vintf_hw_deinit+0x5c/0x1b0 tegra241_cmdqv_remove_vintf+0x34/0xec tegra241_cmdqv_remove+0x40/0x9c arm_smmu_impl_remove+0x20/0x30 devm_action_release+0x14/0x20 devres_release_all+0xa8/0x110 device_unbind_cleanup+0x18/0x84 really_probe+0x1f0/0x29c Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a device_disable() impl op and run it from arm_smmu_disable_action() while the CMDQ is still up. That handles a live unbind. A failed reset is already handled because tegra241_vintf_hw_init() deinits the VINTF on its own error path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu destroy path, so quiesce there too.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c

What this is
ARM SMMU DRIVERSMAINTAINERS section matched on drivers/iommu/arm/ · linux-arm-kernel@lists.infradead.org · Maintained

Check it on the machine

grep -w CONFIG_ARM_SMMU_V3 /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

  • bookwormYnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
  • trixieYnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
  • forky, sidYnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
Y
built in where it is built at all; some flavours do not build it
Build switch
CONFIG_ARM_SMMU_V3

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published
2026-09-04 (44 days ago)source
CVSS
no vector published, unrated
Attack vector
not published
EPSS
0.21%, higher than 10.3% of all CVEssource
CISA KEV
not listedthe KEV catalogue
Debian urgency
unimportantsource
Subsystem
drivers/iommu

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

IntroducedFixed inCommit
6.176.18.47d2ab08437e91
6.177.1.11a94309bb99ea
6.177.2.15994617e09ee
6.177.39ff145a25c5c

Why the CNA scored it this way

The kernel CNA published no CVSS vector and no reasoning for CVE-2026-80818, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.