Look up another CVE · open CVE-2026-72335 in the interactive tracker
CVE-2026-72335
Bluetooth: MGMT: Fix adv monitor add failure cleanup
Published 2026-08-15 (2 months ago) by the Linux kernel CNA. Subsystem net/bluetooth. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-72335 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | fixed | 6.1.180-1 | Update the kernel and reboot. Fixed in 6.1.180-1. A running kernel keeps the old code until the machine restarts. |
| Debian 13trixie | fixed | 6.12.100-1 | Update the kernel and reboot. Fixed in 6.12.100-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.1.5-1 | Update the kernel and reboot. Fixed in 7.1.5-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.1.5-1 | Update the kernel and reboot. Fixed in 7.1.5-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
net/bluetooth/mgmt.c
net/bluetooth/msft.c
- What this is
- BLUETOOTH SUBSYSTEMMAINTAINERS section matched on net/bluetooth/ · linux-bluetooth@vger.kernel.org · Supported
- Kernel module
- bluetooth
Check it on the machine
grep -w CONFIG_BT /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w bluetoothPrints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.
- bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64
- trixie, forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64, s390x/s390x
- M
- a module where it is built at all; some flavours do not build it
- Build switch
- CONFIG_BT
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-08-15 (2 months ago)source
- CVSS
- 7.8 high
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:Hsource recompute it - Attack vector
- local (AV:L)source
- EPSS
- 0.17%, higher than 6.1% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- net/bluetooth
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 5.12 | 6.1.178 | b1a719b3c435 |
| 5.12 | 6.6.145 | 5aabbd01ac31 |
| 5.12 | 6.12.97 | fb256d07395e |
| 5.12 | 6.18.40 | dfc8373893b1 |
| 5.12 | 7.1.5 | dbd935a9e056 |
| 5.12 | 7.2 | 384a4b2fef9f |
Why the CNA scored it this way
Quoted from the kernel CNA's own scoring file, word for word. A highlighted metric carries the most severe value CVSS v3.1 defines for it, which is what pushes the score up. source
- AV:LAttack vector, local
- The UAF is reached by a local process sending MGMT_OP_ADD_ADV_PATTERNS_MONITOR(_RSSI) on a PF_BLUETOOTH HCI_CHANNEL_CONTROL socket via sendto(); remote Bluetooth peers cannot inject MGMT commands, matching prior CNA scoring for the same adv-monitor MGMT path.
- AC:LAttack complexity, low
- On MSFT-capable controllers the attacker fully controls the add-monitor request and can repeatedly submit patterns/RSSI values that cause the MSFT offload add to fail, deterministically driving the callback-free-then-completion-dereference sequence without uncontrollable races.
- PR:LPrivileges required, low
- The handler lacks HCI_MGMT_UNTRUSTED, so the socket must be trusted via CAP_NET_ADMIN; namespace-scoped capability checks allow an unprivileged local user to satisfy this through user namespaces, and session users can also reach it via BlueZ.
- UI:NUser interaction, none
- Exploitation requires only programmatic MGMT commands from the attacker process; no victim interaction such as pairing, accepting connections, or mounting resources is needed once the required local privileges are available.
- S:UScope, unchanged
- Impact is kernel slab corruption and Bluetooth MGMT state misuse within the same kernel security authority; it does not cross VM, IOMMU, or sandbox boundaries into a separate security scope.
- C:HConfidentiality impact, high
- This is a slab use-after-free of struct adv_monitor: mgmt_add_adv_patterns_monitor_complete reads monitor->handle after msft_le_monitor_advertisement_cb kfree()s it, enabling reclaimed-object reads and information disclosure under conservative kernel UAF guidance.
- I:HIntegrity impact, high
- Freed adv_monitor slabs can be reallocated with attacker-influenced data and abused through subsequent kernel dereferences and heap manipulation, providing a plausible path to arbitrary memory corruption and control-flow hijack beyond a simple crash.
- A:HAvailability impact, high
- The bug was validated with KASAN slab-use-after-free in mgmt_add_adv_patterns_monitor_complete, and repeated failing MSFT add attempts can trigger kernel oops/panic from dereferencing freed monitor memory.