Look up another CVE · open CVE-2026-68361 in the interactive tracker
CVE-2026-68361
hwmon: (corsair-psu) Stop device IO before calling hid_hw_stop
Published 2026-08-10 (2 months ago) by the Linux kernel CNA. Subsystem drivers/hwmon. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-68361 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | fixedDLA-4777-1 · 2026-09-08 · text | 6.1.187-1 | Update the kernel and reboot. DLA-4777-1 shipped the fix on 2026-09-08, in 6.1.187-1. A running kernel keeps the old code until the machine restarts. |
| Debian 13trixie | fixed | 6.12.101-1 | Update the kernel and reboot. Fixed in 6.12.101-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.1.6-1 | Update the kernel and reboot. Fixed in 7.1.6-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.1.6-1 | Update the kernel and reboot. Fixed in 7.1.6-1. A running kernel keeps the old code until the machine restarts. |
| Debian 12bookworm · linux-6.12 | fixedDLA-4745-1 · 2026-08-18 · text | 6.12.101-1~deb12u1 | Update the kernel and reboot. DLA-4745-1 shipped the fix on 2026-08-18, in 6.12.101-1~deb12u1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within corsairpsu_probe(). If the probe operation fails after "io start" has been initiated, this race condition will result in a uaf vulnerability [1]. CPU0 CPU1 ==== ==== corsairpsu_probe() hid_device_io_start() ... unlock driver_input_lock hid_hw_stop() kfree(hidraw) __hid_input_report() ... acquire driver_input_lock hid_report_raw_event() hidraw_report_event() ... access hidraw's list_lock // trigger uaf Consequently, when corsairpsu_probe() fails and hid_hw_stop() needs to be executed, the io_started flag is first cleared while holding the driver_input_lock to prevent potential race conditions involving input reports. [1] BUG: KASAN: slab-use-after-free in rt_spin_lock+0x83/0x400 kernel/locking/spinlock_rt.c:56 Call Trace: hidraw_report_event+0x5d/0x3a0 drivers/hid/hidraw.c:577 hid_report_raw_event+0x311/0x1730 drivers/hid/hid-core.c:2076 __hid_input_report drivers/hid/hid-core.c:2152 [inline] hid_input_report+0x44e/0x580 drivers/hid/hid-core.c:2174 hid_irq_in+0x47e/0x6d0 drivers/hid/usbhid/hid-core.c:286 __usb_hcd_giveback_urb+0x3b3/0x5e0 drivers/usb/core/hcd.c:1657 dummy_timer+0x8a9/0x47d0 drivers/usb/gadget/udc/dummy_hcd.c:2005 Allocated by task 10: hidraw_connect+0x57/0x430 drivers/hid/hidraw.c:606 hid_connect+0x5bf/0x19d0 drivers/hid/hid-core.c:2277 hid_hw_start+0xa8/0x120 drivers/hid/hid-core.c:2387 corsairpsu_probe+0xd9/0x3c0 drivers/hwmon/corsair-psu.c:782 Freed by task 10: hidraw_disconnect+0x4f/0x60 drivers/hid/hidraw.c:662 hid_disconnect drivers/hid/hid-core.c:2362 [inline] hid_hw_stop+0x101/0x1e0 drivers/hid/hid-core.c:2407 corsairpsu_probe+0x327/0x3c0 drivers/hwmon/corsair-psu.c:826 Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). [groeck: Updated subject and description; call hid_device_io_stop() only if IO has been started]
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
drivers/hwmon/corsair-psu.c
- What this is
- CORSAIR-PSU HARDWARE MONITOR DRIVERMAINTAINERS section matched on drivers/hwmon/corsair-psu.c · linux-hwmon@vger.kernel.org · Maintained
- Kernel module
- corsair_psu
Check it on the machine
grep -wE 'CONFIG_HWMON|CONFIG_SENSORS_CORSAIR_PSU' /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w corsair_psuPrints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.
- bookwormMnot built on amd64/cloud-amd64, arm64/arm64, arm64/cloud-arm64, arm64/rt/arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le
- trixieMnot built on amd64/cloud-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt/arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- forky, sidMnot built on amd64/cloud-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- bookworm · linux-6.12Mnot built on amd64/cloud-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt/arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k
- M
- a module where it is built at all; some flavours do not build it
- Build switches
- CONFIG_HWMON, CONFIG_SENSORS_CORSAIR_PSU
- Reads as
- all on means the file is compiled; any one off means it is not.
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-08-10 (2 months ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.19%, higher than 8.5% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- drivers/hwmon
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 5.11 | 5.15.216 | 45dcd8a63069 |
| 5.11 | 6.1.183 | c80ed058f31b |
| 5.11 | 6.6.148 | e6e1e0f3050d |
| 5.11 | 6.12.101 | c0aae8d24f5e |
| 5.11 | 6.18.42 | ec477af3a7e8 |
| 5.11 | 7.1.6 | bb25bd980f2d |
| 5.11 | 7.2 | 9ab8656548cd |
Debian advisories
| Advisory | Date | Shipped to | Debian |
|---|---|---|---|
| DLA-4777-1 | 2026-09-08 | bookworm 6.1.187-1 | tracker |
| DLA-4745-1 | 2026-08-18 | bookworm 6.12.101-1~deb12u1 | tracker |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-68361, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.