Look up another CVE · open CVE-2026-64513 in the interactive tracker
CVE-2026-64513
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
Published 2026-07-25 (3 months ago) by the Linux kernel CNA. Subsystem arch/x86. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-64513 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | vulnerable | 6.1.190-1 | No fix published anywhere yet, neither in Debian nor upstream for the series bookworm tracks. Watch the Debian tracker page for this CVE. Advisories for bookworm have historically landed a median of 23 days after publication. |
| Debian 13trixie | vulnerable | 6.12.113-1 | No fix published anywhere yet, neither in Debian nor upstream for the series trixie tracks. Watch the Debian tracker page for this CVE. Advisories for trixie have historically landed a median of 11 days after publication. |
| Debian 14forky | fixed | 7.1.4-1 | Update the kernel and reboot. Fixed in 7.1.4-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.1.4-1 | Update the kernel and reboot. Fixed in 7.1.4-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
arch/x86/kvm/lapic.c
arch/x86/kvm/x86.c
- What this is
- KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)MAINTAINERS section matched on arch/x86/kvm/ · kvm@vger.kernel.org · Supported
- Kernel module
- kvm
Check it on the machine
grep -wE 'CONFIG_KVM|CONFIG_KVM_X86' /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
lsmod | grep -w kvmPrints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.
Show whether Debian builds this, per release
Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.
- bookwormBnot built on arm64/rt/arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
- trixieMnot built on arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt/arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- forky, sidMnot built on arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
- B
- built in on some, a module on others, absent on the rest
- M
- a module where it is built at all; some flavours do not build it
- Build switches
- CONFIG_KVM, CONFIG_KVM_X86
- Reads as
- all on means the file is compiled; any one off means it is not.
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-07-25 (3 months ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.22%, higher than 11.9% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- arch/x86
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 4.11 | 6.18.39 | ff9c4c642888 |
| 4.11 | 7.1.4 | 8c8e8ac22ee1 |
| 4.11 | 7.2 | bb365a506b1e |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-64513, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.