CVE-2026-64504

What the bug is

__bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/iio/accel/bmc150-accel-core.c

What this is

IIO SUBSYSTEM AND DRIVERSMAINTAINERS section matched on drivers/iio/ · linux-iio@vger.kernel.org · Maintained

Kernel module

bmc150_accel_core

Check it on the machine

grep -wE 'CONFIG_BMC150_ACCEL|CONFIG_IIO' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w bmc150_accel_core

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64
• trixie, forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64, s390x/s390x
• bookworm · linux-6.12Mnot built on amd64/cloud-amd64, arm64/cloud-arm64

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_BMC150_ACCEL, CONFIG_IIO

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-07-25 (3 months ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.17%, higher than 5.4% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/iio

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
4.1	5.10.261	b5a9f521e0a4
4.1	5.15.212	2fe0531dd73e
4.1	6.1.178	d0e6d924a548
4.1	6.6.145	bfffc98f3de9
4.1	6.12.96	89f4a4ca0ac3
4.1	6.18.39	3e766526827a
4.1	7.1.4	35a3cd8fd65e
4.1	7.2	ce0e1cae2609

Debian advisories