CVE-2026-64502

What the bug is

ad_sigma_delta_clear_pending_event() falls through to the status register read path for devices with has_registers = false and no rdy_gpiod. For such devices, ad_sd_read_reg() skips the address byte entirely and clocks raw MISO bytes with no address phase — making it byte-for-byte identical to reading conversion data. If a pending conversion result is present, this partially consumes it and corrupts the data stream for the subsequent ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). Furthermore, with num_resetclks = 0 on these devices, data_read_len evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to SIZE_MAX and corrupting the heap. Fix by returning 0 immediately when neither rdy_gpiod nor has_registers is set. This is safe for all current registerless devices: ad7191 and ad7780 (with powerdown GPIO) are reset between conversions by CS deassertion, so there is no stale result to drain; ad7780 (without powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY at the output data rate regardless of whether the previous result was read, so the next falling edge fires naturally. A future registerless device that holds ~DRDY asserted until data is read would be broken by this early return and would require either num_resetclks set or a rdy-gpio. The same heap corruption is reachable on any device with rdy_gpiod set but num_resetclks = 0: if the GPIO indicates a pending event, the drain path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers. Add an explicit data_read_len == 0 guard after the pending event check; the stale result is then consumed by the first ad_sd_read_reg() call in ad_sigma_delta_single_conversion().

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/iio/adc/ad_sigma_delta.c

What this is

ANALOG DEVICES INC IIO DRIVERSMAINTAINERS section matched on drivers/iio/*/ad* · linux@analog.com · Supported

Kernel module

ad_sigma_delta

Check it on the machine

grep -wE 'CONFIG_AD_SIGMA_DELTA|CONFIG_IIO' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w ad_sigma_delta

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/cloud-amd64, arm64/cloud-arm64
• trixie, forky, sidMnot built on amd64/cloud-amd64, arm64/cloud-arm64, s390x/s390x

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_AD_SIGMA_DELTA, CONFIG_IIO

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-07-25 (3 months ago)source

CVSS

7.8 high
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:Hsource recompute it

Attack vector

local (AV:L)source

EPSS

0.17%, higher than 6.3% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

unimportantsource

Subsystem

drivers/iio

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
6.14	6.18.39	3394e0b33284
6.14	7.1.4	3bceb26dfaf7
6.14	7.2	91bc6767a4f5