CVE-2026-64365

What the bug is

letsketch_driver does not provide a .remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no .remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event may have armed the timer before devm releases data. Fix by adding a .remove callback that calls hid_hw_stop() first. hid_hw_stop() synchronously kills the URBs that deliver raw_event(), so once it returns no path can re-arm the timer. timer_shutdown_sync() then drains any in-flight callback and permanently disables further mod_timer() calls. Apply the same timer_shutdown_sync() in the probe error path so the timer is guaranteed not to outlive data.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/hid/hid-letsketch.c

What this is

LETSKETCH HID TABLET DRIVERMAINTAINERS section matched on drivers/hid/hid-letsketch.c · linux-input@vger.kernel.org · Maintained

Check it on the machine

grep -wE 'CONFIG_HID|CONFIG_HID_LETSKETCH|CONFIG_HID_SUPPORT' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

Show whether Debian builds this, per release

Debian does not build this code. In 5 releases below, every kernel flavour Debian publishes has the switch off, so the vulnerable file is compiled into no kernel binary Debian ships.

• bookworm, trixie, forky, sid, bookworm · linux-6.12n

n

not enabled on any flavour - this release does not build the code

Build switches

CONFIG_HID, CONFIG_HID_LETSKETCH, CONFIG_HID_SUPPORT

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-07-25 (3 months ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.13%, higher than 2.3% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/hid

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
5.17	6.1.178	2bb6e7143cf7
5.17	6.6.145	523db788c0f8
5.17	6.12.96	17f5928d7010
5.17	6.18.39	3eca1a8165b5
5.17	7.1.4	df3d8aa1a939
5.17	7.2	46c8beeccd8a

Debian advisories