data built 2026-10-19T13:16:53Z

Look up another CVE · open CVE-2026-64363 in the interactive tracker

CVE-2026-64363

HID: appleir: fix UAF on pending key_up_timer in remove()

EPSS 0.2%

Published 2026-07-25 (3 months ago) by the Linux kernel CNA. Subsystem drivers/hid. Debian urgency: not yet assigned.

What to do, per Debian release

Debian's own status for CVE-2026-64363 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source

ReleaseStatus VersionWhat this means
Debian 12bookwormfixedDLA-4720-1 · 2026-08-05 · text6.1.180-1Update the kernel and reboot. DLA-4720-1 shipped the fix on 2026-08-05, in 6.1.180-1. A running kernel keeps the old code until the machine restarts.
Debian 13trixiefixedDSA-6405-1 · 2026-07-31 · text6.12.100-1Update the kernel and reboot. DSA-6405-1 shipped the fix on 2026-07-31, in 6.12.100-1. A running kernel keeps the old code until the machine restarts.
Debian 14forkyfixed7.1.4-1Update the kernel and reboot. Fixed in 7.1.4-1. A running kernel keeps the old code until the machine restarts.
Debian unstablesidfixed7.1.4-1Update the kernel and reboot. Fixed in 7.1.4-1. A running kernel keeps the old code until the machine restarts.
Debian 12bookworm · linux-6.12fixedDLA-4724-1 · 2026-08-07 · text6.12.100-1~deb12u1Update the kernel and reboot. DLA-4724-1 shipped the fix on 2026-08-07, in 6.12.100-1~deb12u1. A running kernel keeps the old code until the machine restarts.

The vulnerability

What the bug is

appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/hid/hid-appleir.c

What this is
HID CORE LAYERMAINTAINERS section matched on drivers/hid/ · linux-input@vger.kernel.org · Maintained
Kernel module
hid_appleir

Check it on the machine

grep -wE 'CONFIG_HID|CONFIG_HID_APPLEIR|CONFIG_HID_SUPPORT' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w hid_appleir

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

  • bookwormMnot built on amd64/cloud-amd64, arm64/arm64, arm64/cloud-arm64, arm64/rt/arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
  • trixieMnot built on amd64/cloud-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt/arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, riscv64/riscv64, s390x/s390x
  • forky, sidMnot built on amd64/cloud-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, riscv64/riscv64, s390x/s390x
  • bookworm · linux-6.12Mnot built on amd64/cloud-amd64, arm64/arm64, arm64/arm64-16k, arm64/cloud-arm64, arm64/rt/arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp
M
a module where it is built at all; some flavours do not build it
Build switches
CONFIG_HID, CONFIG_HID_APPLEIR, CONFIG_HID_SUPPORT
Reads as
all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published
2026-07-25 (3 months ago)source
CVSS
no vector published, unrated
Attack vector
not published
EPSS
0.17%, higher than 5.8% of all CVEssource
CISA KEV
not listedthe KEV catalogue
Debian urgency
not yet assignedsource
Subsystem
drivers/hid

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

IntroducedFixed inCommit
3.105.10.26189ef67359672
3.105.15.2123d30a0bb0e79
3.106.1.17837a52c61d4f7
3.106.6.14505e3decc55d1
3.106.12.973755f6e25776
3.106.18.39b363d964ca82
3.107.1.46b0838e86da8
3.107.275fe87e19d8a

Debian advisories

AdvisoryDateShipped toDebian
DLA-4724-12026-08-07bookworm 6.12.100-1~deb12u1tracker
DLA-4723-12026-08-07bullseye 6.1.180-1~deb11u1tracker
DLA-4720-12026-08-05bookworm 6.1.180-1tracker
DLA-4717-12026-08-05bullseye 5.10.262-1tracker
DSA-6405-12026-07-31trixie 6.12.100-1tracker

Why the CNA scored it this way

The kernel CNA published no CVSS vector and no reasoning for CVE-2026-64363, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.