CVE-2026-64071

What the bug is

nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous() but never clears the pointer afterward. This leads to a use-after-free if nvme_free_host_mem() is called twice in the same error path. This can happen during nvme_probe() when nvme_setup_host_mem() succeeds in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem() fails with an I/O error: nvme_setup_host_mem() nvme_alloc_host_mem_single() -> sets dev->hmb_sgt nvme_set_host_mem() -> fails with -EIO nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it return error nvme_probe() error path: nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free The second call dereferences the freed sgt, causing a NULL pointer dereference in iommu_dma_free_noncontiguous() when it accesses sgt->sgl->dma_address (the backing memory has been freed and zeroed). This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC Envoy Express behind a Dell WD22TB4 dock) where the device intermittently returns I/O errors during HMB setup due to PCIe link instability. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80 Call Trace: <TASK> dma_free_noncontiguous+0x3b/0x130 nvme_free_host_mem+0x30/0xf0 [nvme] nvme_probe.cold+0xcc/0x275 [nvme] local_pci_probe+0x43/0xa0 pci_device_probe+0xeea/0x290 really_probe+0xf9/0x3b0 __driver_probe_device+0x8b/0x170 driver_probe_device+0x24/0xd0 __driver_attach_async_helper+0x6b/0x110 async_run_entry_fn+0x37/0x170 process_one_work+0x1ac/0x3d0 worker_thread+0x1b8/0x360 kthread+0xf7/0x130 ret_from_fork+0x2d8/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by setting dev->hmb_sgt to NULL after freeing it, so the second call takes the multi-descriptor path which safely handles the already-cleaned-up state.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/nvme/host/pci.c

What this is

NVM EXPRESS DRIVERMAINTAINERS section matched on drivers/nvme/host/ · linux-nvme@lists.infradead.org · Supported

Kernel module

nvme

Check it on the machine

grep -w CONFIG_BLK_DEV_NVME /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w nvme

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormb
• trixieBnot built on armel/rpi
• forky, sidb

b

built in on some flavours, a module on others

B

built in on some, a module on others, absent on the rest

Build switch

CONFIG_BLK_DEV_NVME

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-07-19 (3 months ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.13%, higher than 2.5% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

unimportantsource

Subsystem

drivers/nvme

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
6.13	6.18.34	9525e3a6fbb1
6.13	7.0.11	7c89f474005d
6.13	7.1	b35a13036755