CVE-2026-53332

What the bug is

When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture.

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/slimbus/qcom-ngd-ctrl.c

What this is

SERIAL LOW-POWER INTER-CHIP MEDIA BUS (SLIMbus)MAINTAINERS section matched on drivers/slimbus/ · linux-sound@vger.kernel.org · Maintained

Kernel module

slim_qcom_ngd_ctrl

Check it on the machine

grep -wE 'CONFIG_SLIMBUS|CONFIG_SLIM_QCOM_NGD_CTRL' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w slim_qcom_ngd_ctrl

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian does not build this code in 1 release. It does build it in 3 releases, so the answer depends on which release the machine runs.

• bookwormn
• trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
• forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x

n

not enabled on any flavour - this release does not build the code

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_SLIMBUS, CONFIG_SLIM_QCOM_NGD_CTRL

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-07-01 (4 months ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.13%, higher than 2.3% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/slimbus

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
4.19	5.10.260	946b97d632f0
4.19	5.15.212	2047eeb38db8
4.19	6.1.178	afc631e24693
4.19	6.6.145	290014c79876
4.19	6.12.94	fa3790c7ea98
4.19	6.18.36	24ec89123fc9
4.19	7.0.13	08564e15c47a
4.19	7.1	2a9d50e9ea40

Debian advisories