Look up another CVE · open CVE-2026-53302 in the interactive tracker
CVE-2026-53302
crypto: eip93 - fix hmac setkey algo selection
Published 2026-06-26 (4 months ago) by the Linux kernel CNA. Subsystem drivers/crypto. Debian urgency: unimportant.
What to do, per Debian release
Debian's own status for CVE-2026-53302 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | not affected | 6.1.190-1 | Nothing to do. bookworm never shipped the vulnerable code. |
| Debian 13trixie | not affected | 6.12.113-1 | Nothing to do. trixie never shipped the vulnerable code. |
| Debian 14forky | fixed | 7.0.10-1 | Update the kernel and reboot. Fixed in 7.0.10-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.0.10-1 | Update the kernel and reboot. Fixed in 7.0.10-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields. A subsequent crypto operation then dereferences a NULL pointer in the request context, resulting in a kernel panic: ``` pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93] lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93] sp : ffffffc082feb820 x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980 x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0 x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000 x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009 x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0 Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740) ``` The reported symbol eip93_aead_handle_result+0xc8c is a resolution artifact from static functions being merged under the nearest exported symbol. Decoding the faulting sequence: ``` 910142b6 ADD X22, X21, #0x50 f94012e0 LDR X0, [X23, #0x20] f9002aa0 STR X0, [X21, #0x50] f90006d3 STR X19, [X22, #0x8] f9400740 LDR X0, [X26, #0x8] ``` The faulting LDR at [X26, #0x8] is loading ctx->flags (offset 8 in eip93_hash_ctx), where ctx has been resolved to NULL from a partially initialized or unreachable transform context following the failed setkey. Fix this by dropping the CRYPTO_ALG_ASYNC mask from the crypto_alloc_ahash() call. The code already handles async completion correctly via crypto_wait_req(), so there is no requirement to restrict the lookup to synchronous algorithms. Note that hashing a single 64-byte block through the hardware is likely slower than doing it in software due to the DMA round-trip overhead, but offloading it may still spare CPU cycles on the slower embedded cores where this IP is found. [Detailed investigation report of this bug]
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
drivers/crypto/inside-secure/eip93/eip93-common.c
- What this is
- INSIDE SECURE EIP93 CRYPTO DRIVERMAINTAINERS section matched on drivers/crypto/inside-secure/eip93/ · linux-crypto@vger.kernel.org · Maintained
Check it on the machine
grep -wE 'CONFIG_CRYPTO|CONFIG_CRYPTO_DEV_EIP93' /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
Show whether Debian builds this, per release
Debian does not build this code in 2 releases. The build rule could not be established for 2 releases, so nothing is claimed about those.
- bookworm, trixie?
- forky, sidn
- ?
- not established - no Makefile entry for the affected file
- n
- not enabled on any flavour - this release does not build the code
Where a release above reads "not established", no build rule for the affected file was found in that release's kernel tree. That is a gap in this lookup, not a finding that the code is absent.
- Build switches
- CONFIG_CRYPTO, CONFIG_CRYPTO_DEV_EIP93
- Reads as
- all on means the file is compiled; any one off means it is not.
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-06-26 (4 months ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.16%, higher than 4.8% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- unimportantsource
- Subsystem
- drivers/crypto
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 6.15 | 6.18.33 | fc9310d79fdb |
| 6.15 | 7.0.10 | ec226d3e58bb |
| 6.15 | 7.1 | 3ba3b02f897b |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-53302, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.