Look up another CVE · open CVE-2026-53111 in the interactive tracker
CVE-2026-53111
bpf: test_run: Fix the null pointer dereference issue in bpf_lwt_xmit_push_encap
Published 2026-06-24 (4 months ago) by the Linux kernel CNA. Subsystem net/bpf. Debian urgency: not yet assigned.
What to do, per Debian release
Debian's own status for CVE-2026-53111 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source
| Release | Status | Version | What this means |
|---|---|---|---|
| Debian 12bookworm | fixedDLA-4665-1 · 2026-07-03 · text | 6.1.176-1 | Update the kernel and reboot. DLA-4665-1 shipped the fix on 2026-07-03, in 6.1.176-1. A running kernel keeps the old code until the machine restarts. |
| Debian 13trixie | fixed | 6.12.94-1 | Update the kernel and reboot. Fixed in 6.12.94-1. A running kernel keeps the old code until the machine restarts. |
| Debian 14forky | fixed | 7.0.10-1 | Update the kernel and reboot. Fixed in 7.0.10-1. A running kernel keeps the old code until the machine restarts. |
| Debian unstablesid | fixed | 7.0.10-1 | Update the kernel and reboot. Fixed in 7.0.10-1. A running kernel keeps the old code until the machine restarts. |
The vulnerability
What the bug is
The bpf_lwt_xmit_push_encap helper needs to access skb_dst(skb)->dev to calculate the needed headroom: err = skb_cow_head(skb, len + LL_RESERVED_SPACE(skb_dst(skb)->dev)); But skb->_skb_refdst may not be initialized when the skb is set up by bpf_prog_test_run_skb function. Executing bpf_lwt_push_ip_encap function in this scenario will trigger null pointer dereference, causing a kernel crash as Yinhao reported: [ 105.186365] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 105.186382] #PF: supervisor read access in kernel mode [ 105.186388] #PF: error_code(0x0000) - not-present page [ 105.186393] PGD 121d3d067 P4D 121d3d067 PUD 106c83067 PMD 0 [ 105.186404] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 105.186412] CPU: 3 PID: 3250 Comm: poc Kdump: loaded Not tainted 6.19.0-rc5 #1 [ 105.186423] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 105.186427] RIP: 0010:bpf_lwt_push_ip_encap+0x1eb/0x520 [ 105.186443] Code: 0f 84 de 01 00 00 0f b7 4a 04 66 85 c9 0f 85 47 01 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8b 73 58 48 83 e6 fe <48> 8b 36 0f b7 be ec 00 00 00 0f b7 b6 e6 00 00 00 01 fe 83 e6 f0 [ 105.186449] RSP: 0018:ffffbb0e0387bc50 EFLAGS: 00010246 [ 105.186455] RAX: 000000000000004e RBX: ffff94c74e036500 RCX: ffff94c74874da00 [ 105.186460] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94c74e036500 [ 105.186463] RBP: 0000000000000001 R08: 0000000000000002 R09: 0000000000000000 [ 105.186467] R10: ffffbb0e0387bd50 R11: 0000000000000000 R12: ffffbb0e0387bc98 [ 105.186471] R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000002 [ 105.186484] FS: 00007f166aa4d680(0000) GS:ffff94c8b7780000(0000) knlGS:0000000000000000 [ 105.186490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 105.186494] CR2: 0000000000000000 CR3: 000000015eade001 CR4: 0000000000770ee0 [ 105.186499] PKRU: 55555554 [ 105.186502] Call Trace: [ 105.186507] <TASK> [ 105.186513] bpf_lwt_xmit_push_encap+0x2b/0x40 [ 105.186522] bpf_prog_a75eaad51e517912+0x41/0x49 [ 105.186536] ? kvm_clock_get_cycles+0x18/0x30 [ 105.186547] ? ktime_get+0x3c/0xa0 [ 105.186554] bpf_test_run+0x195/0x320 [ 105.186563] ? bpf_test_run+0x10f/0x320 [ 105.186579] bpf_prog_test_run_skb+0x2f5/0x4f0 [ 105.186590] __sys_bpf+0x69c/0xa40 [ 105.186603] __x64_sys_bpf+0x1e/0x30 [ 105.186611] do_syscall_64+0x59/0x110 [ 105.186620] entry_SYSCALL_64_after_hwframe+0x76/0xe0 [ 105.186649] RIP: 0033:0x7f166a97455d Temporarily add the setting of skb->_skb_refdst before bpf_test_run to resolve the issue.
Where it lives
The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.
net/bpf/test_run.c
- What this is
- BPF [GENERAL] (Safe Dynamic Programs and Tools)MAINTAINERS section matched on net/bpf/ · bpf@vger.kernel.org · Supported
Check it on the machine
grep -w CONFIG_BPF_SYSCALL /boot/config-$(uname -r)Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.
Show whether Debian builds this, per release
Debian builds this code. Every release below compiles the affected file into the kernels it ships.
- bookworm, trixie, forky, sidy
- y
- built into the kernel image on every flavour - only a patch removes it
- Build switch
- CONFIG_BPF_SYSCALL
From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages
Signals
- Published
- 2026-06-24 (4 months ago)source
- CVSS
- no vector published, unrated
- Attack vector
- not published
- EPSS
- 0.12%, higher than 1.8% of all CVEssource
- CISA KEV
- not listedthe KEV catalogue
- Debian urgency
- not yet assignedsource
- Subsystem
- net/bpf
Upstream fixes
The versions the CNA records as introducing and fixing this, and the commit for each. source
| Introduced | Fixed in | Commit |
|---|---|---|
| 5.1 | 6.1.175 | 5c8d1f91fc48 |
| 5.1 | 6.6.141 | c7ad31fb948f |
| 5.1 | 6.12.91 | 599905c3f10b |
| 5.1 | 6.18.33 | 5500913516e0 |
| 5.1 | 7.0.10 | 94f95328b907 |
| 5.1 | 7.1 | 972787479ee7 |
Debian advisories
| Advisory | Date | Shipped to | Debian |
|---|---|---|---|
| DLA-4671-1 | 2026-07-05 | bullseye 6.1.176-1~deb11u1 | tracker |
| DLA-4665-1 | 2026-07-03 | bookworm 6.1.176-1 | tracker |
Why the CNA scored it this way
The kernel CNA published no CVSS vector and no reasoning for CVE-2026-53111, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.