CVE-2026-43250

What the bug is

The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with status -ESHUTDOWN but still has active DMA state. If the gadget driver reuses this request on reconnect without reinitializing it, the stale DMA state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero num_mapped_sgs) and attempt to use freed/invalid DMA addresses, leading to alignment errors and potential memory corruption. The normal completion path via _hardware_dequeue() properly calls usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before returning the request. The _ep_nuke() path must do the same cleanup to ensure requests are returned in a clean, reusable state. Fix: Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror the cleanup sequence in _hardware_dequeue(): - Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set - Call sglist_do_debounce() with copy=false if bounce buffer exists This ensures that when requests are returned due to endpoint shutdown, they don't retain stale DMA mappings. The 'false' parameter to sglist_do_debounce() prevents copying data back (appropriate for shutdown path where transfer was aborted).

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/usb/chipidea/udc.c

What this is

CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLERMAINTAINERS section matched on drivers/usb/chipidea/ · linux-usb@vger.kernel.org · Maintained

Kernel module

ci_hdrc

Check it on the machine

grep -wE 'CONFIG_OF|CONFIG_PCI|CONFIG_USB|CONFIG_USB_CHIPIDEA|CONFIG_USB_CHIPIDEA_UDC|CONFIG_USB_GADGET|CONFIG_USB_PHY|CONFIG_USB_SUPPORT' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w ci_hdrc

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

• bookwormMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
• trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
• forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x

M

a module where it is built at all; some flavours do not build it

Build switches

CONFIG_OF, CONFIG_PCI, CONFIG_USB, CONFIG_USB_CHIPIDEA, CONFIG_USB_CHIPIDEA_UDC, CONFIG_USB_GADGET, CONFIG_USB_PHY, CONFIG_USB_SUPPORT

Reads as

all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published

2026-05-06 (5 months ago)source

CVSS

no vector published, unrated

Attack vector

not published

EPSS

0.18%, higher than 6.5% of all CVEssource

CISA KEV

not listedthe KEV catalogue

Debian urgency

not yet assignedsource

Subsystem

drivers/usb

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

Introduced	Fixed in	Commit
2.6.29	6.12.75	1b72b834511d
2.6.29	6.18.16	f4fbf2d4750d
2.6.29	6.19.6	e74c436f8568
2.6.29	7.0	cea2a1257a3b