data built 2026-10-19T13:16:53Z

Look up another CVE · open CVE-2025-40003 in the interactive tracker

CVE-2025-40003

net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work

EPSS 0.2%

Published 2025-10-18 (12 months ago) by the Linux kernel CNA. Subsystem drivers/net. Debian urgency: not yet assigned.

What to do, per Debian release

Debian's own status for CVE-2025-40003 in every release this site tracks, and what each one means in practice. Every status below is the one the Debian Security Team publishes for this CVE. source

ReleaseStatus VersionWhat this means
Debian 12bookwormvulnerable6.1.190-1No fix published anywhere yet, neither in Debian nor upstream for the series bookworm tracks. Watch the Debian tracker page for this CVE. Advisories for bookworm have historically landed a median of 23 days after publication.
Debian 13trixiefixed6.12.57-1Update the kernel and reboot. Fixed in 6.12.57-1. A running kernel keeps the old code until the machine restarts.
Debian 14forkyfixed6.17.6-1Update the kernel and reboot. Fixed in 6.17.6-1. A running kernel keeps the old code until the machine restarts.
Debian unstablesidfixed6.17.6-1Update the kernel and reboot. Fixed in 6.17.6-1. A running kernel keeps the old code until the machine restarts.

The vulnerability

What the bug is

The origin code calls cancel_delayed_work() in ocelot_stats_deinit() to cancel the cyclic delayed work item ocelot->stats_work. However, cancel_delayed_work() may fail to cancel the work item if it is already executing. While destroy_workqueue() does wait for all pending work items in the work queue to complete before destroying the work queue, it cannot prevent the delayed work item from being rescheduled within the ocelot_check_stats_work() function. This limitation exists because the delayed work item is only enqueued into the work queue after its timer expires. Before the timer expiration, destroy_workqueue() has no visibility of this pending work item. Once the work queue appears empty, destroy_workqueue() proceeds with destruction. When the timer eventually expires, the delayed work item gets queued again, leading to the following warning: workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0 ... RIP: 0010:__queue_work+0x875/0xaf0 ... RSP: 0018:ffff88806d108b10 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88 RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2 R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000 R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0 FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0 Call Trace: <IRQ> ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... The following diagram reveals the cause of the above warning: CPU 0 (remove) | CPU 1 (delayed work callback) mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAF The above scenario actually constitutes a UAF vulnerability. The ocelot_stats_deinit() is only invoked when initialization failure or resource destruction, so we must ensure that any delayed work items cannot be rescheduled. Replace cancel_delayed_work() with disable_delayed_work_sync() to guarantee proper cancellation of the delayed work item and ensure completion of any currently executing work before the workqueue is deallocated. A deadlock concern was considered: ocelot_stats_deinit() is called in a process context and is not holding any locks that the delayed work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated ocelot-swit ---truncated---

Where it lives

The fix touches these files. If the subsystem is one you do not use, the practical exposure is lower, though the package is still the vulnerable one.

drivers/net/ethernet/mscc/ocelot_stats.c

What this is
OCELOT ETHERNET SWITCH DRIVERMAINTAINERS section matched on drivers/net/ethernet/mscc/ · netdev@vger.kernel.org · Supported
Kernel module
mscc_ocelot_switch_lib

Check it on the machine

grep -wE 'CONFIG_ETHERNET|CONFIG_MSCC_OCELOT_SWITCH_LIB|CONFIG_NET_VENDOR_MICROSEMI' /boot/config-$(uname -r)

Reads the booted kernel's own configuration, on the machine and nowhere else. =y is built in, =m is a module, and an is not set line means the code is not there.

lsmod | grep -w mscc_ocelot_switch_lib

Prints a line if that module is loaded right now, and nothing if it is not. One that is not loaded can still be loaded later by anything that needs it.

Show whether Debian builds this, per release

Debian builds this, but not on every flavour. At least one release below builds the code on some of its kernel flavours and not on others, so the answer depends on the architecture and flavour installed.

  • bookwormMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, i386/686, i386/686-pae, i386/rt/686-pae, ppc64el/powerpc64le
  • trixieMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt/amd64, arm64/cloud-arm64, armel/rpi, armhf/armmp, armhf/armmp-lpae, armhf/rt/armmp, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
  • forky, sidMnot built on amd64/amd64, amd64/cloud-amd64, amd64/rt-amd64, arm64/cloud-arm64, armhf/armmp, armhf/armmp-lpae, loong64/loong64, ppc64el/powerpc64le, ppc64el/powerpc64le-64k, riscv64/riscv64, s390x/s390x
M
a module where it is built at all; some flavours do not build it
Build switches
CONFIG_ETHERNET, CONFIG_MSCC_OCELOT_SWITCH_LIB, CONFIG_NET_VENDOR_MICROSEMI
Reads as
all on means the file is compiled; any one off means it is not.

From the configuration Debian publishes for every kernel flavour it builds. It covers only the architectures Debian ships a linux-config package for, and nothing about a kernel you built yourself. Debian's own status above stays authoritative about the source package.MAINTAINERS kbuild Makefiles Debian linux-config packages

Signals

Published
2025-10-18 (12 months ago)source
CVSS
no vector published, unrated
Attack vector
not published
EPSS
0.24%, higher than 14.2% of all CVEssource
CISA KEV
not listedthe KEV catalogue
Debian urgency
not yet assignedsource
Subsystem
drivers/net

Upstream fixes

The versions the CNA records as introducing and fixing this, and the commit for each. source

IntroducedFixed inCommit
4.186.12.5470acdd1eb35f
4.186.17.4c3363db5d068
4.186.18bc9ea7870796

Why the CNA scored it this way

The kernel CNA published no CVSS vector and no reasoning for CVE-2025-40003, which is why it is shown as unrated rather than given an invented score. 6,405 of the 20,413 CVEs here carry reasoning; this is not one of them.